Quote:
Originally Posted by derick33
-The top right pin in the Glow Plug Relay, what glow plug number does it go to?
- It reads as an open on the ohm meter. Rest are below one.
- Should I replace all or can I wait until Spring? I live in Philly.
- Car is 1987 300 SDL
Thanks
|
Derick,
Just to be clear, you are measuring resistance between the hole (connector) in the plug (not the pin on the relay) and a good ground point, right? You keep using the term "pin" but the pins are on the relay (male), the female connector is in the plug. The wires to each of the six glow plugs run from the female connectors in the plugs. If you are measuring at the pin on the relay, you are doing it wrong.
__________________
Respectfully,
/s/
M. Dillon
'87 124.193 (300TD) "White Whale", ~392k miles, 3.5l IP fitted
'95 124.131 (E300) "Sapphire", 380k miles
'73 Balboa 20 "Sanctification"
Charleston SC
|