Ok, so I started this project today hoping to save lots of money but ran into a problem. Get the light with no issues, unscrew the module with no issue but when I go to take wire harness off (it comes off during the ramping as described) the blue part of the wire harness stays inside the module and the back part of it disconnects from it. This exposes the pins and such from the plug and when I do attempt to separate the blue part of the harness from the module it starts to crumble and break, Yikes! I follow the harness back and it appears to be hard wired to the fuse box. Her is the question, can you just get that part of wire harness and reconstruct? Thanks