Removal of the center console (easier to do than describe)

1. Remove the rectangular trim around the shift gate. Pry up gently with a non-marring tool at little at a time. There are four long tabs at the four corners.
2. Remove the wood trim piece by lifting up at front or back. It just pops out. Disconnect cables (3) for switches.
3. There are six philips screws. Two at front near ash tray, two in the middle. The rear two are under the felt pad at the bottom of the storage compartment.
4. Remove the small panel at the back of the console.
5. Lift up and pull backward to remove.

I don't have alldatadiy so I don't know. I have read that some people have posted that some alldata procedures are for W124 even when you input W210.

__________________
Good luck.






1998 E320 Wagon