I do not know, because the sticker was already peeled off, but the wires were bad and i had to solder new ones in. Funny enough, the only bad wires that were actually bad were for the ignition coils and for coolant temperature sensor, other ones were in great shape.
Of course after i solder them, I ohm tested each pin on the computer connector to make sure none were touching each other creating a short.
Kestas, do you have ASR on your 95'? If not, can you test out the pins on your throttle body? Im guessing that throttle bodies from 95' and from 94' w/o ASR are the same. Im only interested pins:
#10 + # 6 and #10 + #8, I would like to compare my results to yours at (what happens after you WOT, and what happens when it is closed all the way).
I would really appreciated if you did that for me
