|
Its not that big a deal.
Find the round black plastic snap on button. It is on the strike end of the door about where the lock is. Flip it out and unscrew the little bolt which is hidden underneath.
Put a block of wood inside the outer handle and the chrome body the handle is mounted on. Strike the wood hard enough to move the entire outer handle forward (toward the front of the car).
Put the key in the lockset and twist it clockwise about 50 degrees while pulling gently on the handle assembly. A little back and forth motion will bring the entire assembly out of the door body. Take it easy here. Attached to the handle is a wire with a junction. Just below the opening there is a carriage which hold the wire junction. It is likely your problem is moisture or a broken or skinned wire.
Consider the attachment.
The first time I tried this took me two beers. The second time I didn't even get a sip.
|