The first thing I checked out was the fuel pump relay. I ordered a replacement, but my car is fitted with a MAS relay instead, so it wouldn't fit. Instead I turned on the key and listened for pump activity with the door open - I could hear the pump spool up and then shut down when up to pressure, but still, when it was warm, it wouldn't start. So, I re-checked for pump sound and it's there, so I made the assumption the relay is ok.

Then I replaced the crankshaft position sensor, and still the same problem persists.

Then I replaced the 4 pin temperature sensor that sends engine temperature information to the ecu. Still the same problem.

I have yet to check out the rotor and cap as suggested, since I think they are the originals. In the meantime, does anyone know if there is a way to read trouble codes (fault codes) on this vehicle??

Thank you all for your time and good advice!

Dave