When the OVP fails to power up the ABS light will come on. The ABS turns the light on when the power supply is less than 9 volts hence the light when the relay fails. Stalling isn't a certainty when that happens. When the engine module goes off line the engine can run on the baseline settings without ECU intervention. Stalling occurs if the computer has adjusted the running parameters enough that the transition back to baseline settings is too abrupt.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff