Quote:
Originally Posted by gabzor
you need a new temp sensor, that goes to your bumper.. resistors on yours are probably dying
thanks for the update.. and james regarding my question, doesn't matter about the voltage?
and yay i can replace my bulb now (hopefully the pins aren't soldered into the bulbs)  |
yes, his temp sensor is probably bad. I have a link to an anlternative source rather than Meredes up in one of my above posts.
The bulb is indeed soldered to the PCB. I dont have a picture of it though. Its on the side thats not shown in all my pic. Youd see if if you tear it apart. Make sure all your connectors are plugged in before assuming its the bulb.
Regarding the capacitor, yes as long as the capacitance rating is the same (uF) you can install higher working voltage capacitors, never go lower though!
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!
(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)
82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k
RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k