Quote:
Originally Posted by teezer
it's pretty hard to get positive camber on a benz, usually something is bent or installed wrong
did you get the alignment printout ??
|
It's not hard because even less than 1* can give you tops of your tires some bad markings.. Nothing is bent since everything is new.. from control arms, mounts, jpoints, bushings... etc.. I just need to do the camber and reset toe and all will be well. I wasd told by a forum member that I can crank out 2.2* negative camber which I may go for and yes I do have a digital camber gauge.. My who point to the post was to find out which Ecc bolts.. fromt or rear on the control arms were used to adjust camber..
Chris