Thread: K-Mac W210 bushing installation questions**
View Single Post
  #3  
Old 03-08-2012, 08:27 AM
citationtech citationtech is offline
Registered User
  
Join Date: Sep 2010
Location: Cove Point, MD
Posts: 245
Quote:
Originally Posted by Kruiser View Post
Yes, the bushings can be installed in any position. The adjustment is internal within the bushes, you put them in and then turn the centre bolt to get your alignment setting.

But you MUST do the bolt up TIGHT when it's adjusted!
I assume you mean final torque on the nut after final adjustment. K-Mac's spec if 90 ft/lb on the nut.

Did you install your bushings?
Reply With Quote