View Single Post
  #44  
Old 03-16-2012, 01:15 PM
JamesDean's Avatar
JamesDean JamesDean is offline
Electrical Engineer
 
Join Date: Apr 2005
Location: NE Ohio
Posts: 5,038
Quote:
Originally Posted by ShadeTree300SD View Post
Ok, got the meter. I set it on 10a, removed #12 fuse and tested. Here are the numbers:

Key on engine off = .64
Engine running = .62
Engine running brakes on = 4.01 max
Engine running, brake on, left turn signal on = 6.50 max
Engine running, brake on, right turn signal on = 6.89 max
These numbers all sound acceptable. Each tail light / turning light is about 1.5 A draw each.

Quote:
Originally Posted by ShadeTree300SD View Post
I went under the car and found the single wire going to the back of the tranny and at first I thought it was rubbed raw on the crossmember but I don't think it is. What happens if this is disconnected?
That is probably the speedometer sensor wire.

Quote:
Originally Posted by ShadeTree300SD View Post
Do I need to remove the center console stuff to get that carpet off the side of it? I took the floor carpet out but was afraid to yank to hard on that side carpet.
The center console carpet is held in by a screw in the vicinity of the gas pedal. If you've removed the knee panel, remove the screw and the carpeting should be able to be removed.

Quote:
Originally Posted by ShadeTree300SD View Post
I disconnected a plug that was to the left of the cruise control amplifier, is that the warning thingy?
It should have been to the right of the cruise control unit, they share a bracket.
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k
Reply With Quote