Quote:
Originally Posted by Yak
Okay, matching your description of the connector up, that's C107 and is for the power windows. There's an error in the FSM in the back that ID's this as a 6 pin, it's an 8 pin. You could (if you cared) check pages 130-131 and see that the 7 wires match.
There's no connection between this connector and Fuse 12, so its earlier behavior was a red herring.
|
It is true that connector was for the power windows. I looked at pages 130-131 and I'm not sure that I fully understand. Is that connection shown? I see everything else and the wire colors are the ones I noted in the connector.