View Single Post
  #1  
Old 03-25-2012, 10:41 AM
nobby's Avatar
nobby nobby is offline
Automotive Nobbiest
 
Join Date: Aug 2005
Location: Wentworth Nord, Quebec
Posts: 822
Quote:
Originally Posted by 300sdToronto View Post
My project too is very much alive. I am just moving more slowly than some of you other guys.

I had the car up on a lift this week and surveyed the work to be done. I think my transmission flare may be vac related as it goes away under hard acceleration, so I need to do some testing. Also it looks like the rear cover on the diff has an oil leak and I am trying to decide if I can get it off without having to drop the rear axle. Looks like it is not too bad a job to remove the diff mount....

I am extemely busy for the next couple of weeks so expect updates when I get more time to tackle the beastie.
Obviously I can't see it from here......but generally the covers don't tend to leak.
It's usually one of the 3 rotating shaft seals that leaks and then the oil migrates to the lowest point.

But if you are taking the cover off, take a pic for all to see.

Further, you might take the opportunity to clean the breather at the top of the diff.
Reply With Quote