|
Curious as to what method you used to "suck" it out with?
The tensioner rail pivot pin is under a cap. Remove the cap off the block using an allen wrench, then there is a pin which will slide out easily if you could only get a grip on it. As I recall, I used a straight blade screwdriver and sorta wedged it inside the pin and slid it out. Its hard to get a grip on the pin.
__________________
I got too many cars!! Insurance eats me alive. Dave
78 Corvette Stingray - 3k
82 242 Turbo Volvo - Manual - 270k
86 300e 5 speed manual - 210k
87 420sel - 240k
89 560sl - 78k
91 420sel - 205k
91 560sel - 85k
94 GMC Suburban - 90k
97 Harley Davidson Heritage Softail - 25k
00 GMC Silverado 1 ton 30k
|