Quote:
Originally Posted by myskyon
i have removed that line in place i have put a large filter... i would say you do not need to go to the dealer to replace... just go to your local parts place and ask for some 1/4 fuel hose and get some fuel injection hose clamps not the normal hose clamps...
|
I changed mine to Rubber Hose for the same reason.
You can buy all of the Plastic Fuel Lines; but at some expense. The real advantage of the Plastic Lines is longivity.
I donot see a huge advantage in being able to observe Air Leak Bubbles because the Plastic Tubing is gong to discolor and make it hard to observe bubbles and the symptoms of an Air Leak are obvious.
Not to mention there is really only 3 common sources of Air leaks. The FueL inlet Hoses, the Plastic Primary Filter or the Hand Primer.
A long time ago one of our members replaced his Plastic Tubing with I think it was Tygon; the US equivilant of what the Germans used. But, that suff is extremely stiff to get back on the Hose Barbs of the Fittings. He said He heated up the Plastic and shoved it on.
I did not think I would have success at that so I went with the Rubber Hose.