I used the sanden to york bracket when I retrofitted a sanden in place of my R4. I mounted it differently because my compressor is on the bottom of my engine.

Just so you'll know, the bracket I received was pretty crappy. The "arms" for adjustment were out of square with the base and the slots were cast wonky. You may have to do some work on it to get the compressor mounted square. It eventually worked but just not out of the box.

It came with a bunch of bolts for mounting the compressor but I doubt it would have stayed in place and held belt tension if you used it the way prescribed...



Just a FYI, a sanden 709 compressor uses the same mounting locations as a 508 and is a newer 7 cyl (VS 5 cyl) design. I'm happy with my 709 in my 116.

__________________
My occupational hazard bein'
my occupation's just not around...
1980 300SD
1980 300SD