Quote:
Originally Posted by werminghausen
I did replace drier and evaporator with expansion valve with the new condenser.
In this country the SDL AC is not enough I have to say and I don't understand why there are still bubbles at the sight glass.
Are there any tests I could run?
|
At 110F., the high side pressure is going to scare you if the electric fan is not running. That's the first thing to check.
It might be possible that the system is low on R-12 with high pressure that appears a bit too high, when, in reality, it's fine at that temperature.
That compressor is quite capable in the SDL and I would expect the system to achieve 40F. at low fan speed at those ambients.