Quote:
Originally Posted by 280EZRider
I just replaced my NSS a few weeks ago. I found a great tip here in the DIY section that was extremely helpful, and it will eliminate multiple adjustments: Instead of aligning the bracket with the alignment hole on the body of the NSS, turn the ignition on and move the gear selector into Reverse and watch for the back-up lights to come on. Once they´re on. set the NSS at that position. It´s a whole lot easier than the MBZ suggested way.
|
HA, this is the way I installed mine too. I figured everyone would think of this... if not, this is the easiest way to do the job.