Quote:
Originally Posted by MAVA
I'll hammer mine out, so you pushed it out from the inside out?
Now the picture, look at your rear case. The plastic piece in the case is not available, but you have to purchase the whole rear case. I found two cases where the plastic cracked, and fluid leaked.
The finger plastic piece locks-in to the slot in the case and with the B1.
Martin
|
I pushed from the side where the allen screws are, in to the case where you have K1 B2 and the other parts. I used a rubber hammer to hit it with. That plastic is a nice method I liked it try to make one.