|
I have taking it apart B1 piston easier to install the Teflon seal without stretching it too much. Now the problem is to install the pices together again I guess the function is that the two pices move away from each other when the piston adjust when band wears.
Just push the thing back together is not the right way since the function is to stop movement in that direction, I am not sure if the right way to do this is take the parts apart and put the stem in first and then put the circular clip on the stem and the locking clip that lock the circular clip after that. then I have to assembly the locking clip for the stem. I am not sure of the right way to do this sure hope someone can tell me the right way.
|