Got the plastic covers for the conductor plate and the magnet for the pan today THANKS GILLY

I only wanted to torque the valve body to the transmission and finish the rest tomorrow. (Can't find my 7mm Socket for the conductor plate plug adapter).
The plastic covers cover the solenoids pretty well and i think they will do a good job at keeping the metal fillings away from the contact points.

Not sure where the magnet needs to go. I assume it doesn't matter as long as it's on the flat side of the pan, away from the filter

Also need to mention that the fluid i got out of the transmission looked very healthy, except that it was dark. And my transmission doesn't have the drain bolt for the torque converter.