Panel removal is not difficult, there are many of those snap in clips at the lower edge. use a putty knife or such to lever the clips. Then the panel is pulled straight up to release the tabs that slide down into the door for the inside door pull/handle and door pocket. DO NOT TRY to pull the panel at the front edge.it slides up. The reveal strip at the top of the door is usually a tight snap into its metal clips, some judicious prying with a long thin screwdriver does it here.

------------------
Michael Haven CMAT,CMM,L1
MPH Automotive Services
16510 Park Row
Houston, Texas, 77084
281-579-8885