Quote:
Originally Posted by kenny33012
Here's another problem. The turn signals work, but they won't cancel automatically after completing a turn. I saw a thread on turn signals, but the pictures were gone.
|
Usually when this is the case it's because the turn signal stalk had the opposite issue, they wouldn't hold so somebody may have performed the "file technique" to allow the stalk to hold it's spot again when activated. If too much material has been filed away then they will hold and not release. You can either go in and slightly re-file the mechanism or I'd leave it and just let it wear down on it's own over time. If there was another cause you saw in that thread I may have missed it.