Quote:
Originally Posted by firstdiesel
I read up on all of the ways to change the seal, but I haven't nailed down if you can use a 30mm socket or if you need the special order socket to make this happen.
Also, has anyone taken apart the propeller shaft without buying 46mm wrenches?
Thanks, starting this little project today, in a couple of hours!  |
When I first took apart the Drive Shaft I had no 46mm Wrench and used a Plumbing type Chain Wrench.
Later I went to a cheapie Tool Store and bought a 1-13/16" combination Wrench for $15 and I used that to tighten it.
However, I had intended to buy a Crows Foot as there is a specific Torqure on the Nut but I have not yet found one at a decent price.
If I had not bought the Combination Wrench I would have used the Chain Wrench to tighten the Nut.
Besides a Crows Foot type Wrench on eBay they sell Wrenches as in the Pic For ATV Axles. If you position the Wrench at a right angle to your Torque Wrench you can use it to Torque the Nut.