new update.

got a new starter that bench tests fine...

If i jump the junction box between the 1 and 3rd terminals i get nothing... the third terminal has 12.8 volts and the number position has almost 0 volts when grounded to the negative battery terminal.

i still get no click from solenoid there is voltage to the starter when i test the ignition wire at the junction box i get like 1.2 volts then when i test it down by the starter i get 0 volts... i havent had extra pair of hands to turn ignition while i test that wire... does anyone know my next step.. i have tried to read some wiring diagrams to see where i am not getting a connection from my ignition to the solenoid. it would only be guessing from here on out for me.