|
I would just jump it and try starting it, or jump it and have someone listen to see if the pump is running or not, but it's "funner" to see if it starts.
I think those are the right socket numbers, they are directly across from each other and about in the middle (where the plastic pin is betwen the rows that makes sure you are putting the relay in the right way).
There is a diagram on top (or side) of the relay that shows the pin assignments, I believe there are #30 and #87 or 87s.
I always had access to a wire lead set which properly plugged in to the round sockets, you might have to come up with something a bit cruder, hopefully some insulated wire, otherwise if you go really crude like a wire clothes hangar, etc, make sure the bare wire doesn't touch anything metal, keep the wire really short, just long enough to do the job.
|