I have to replace the DS lower transverse control arm (2033300307) on a 2003 C320 4matic.
The ball joint is shot.
Does anyone have access to the WIS with the "how to's" for this control arm.
There seems to be a fair bit of "up" force on the arm from the bushings when the ball joint is loosened from the knuckle.
I expected the control arm to just fall slack....it doesn't, keeps pushing up...so I'm thinking there must be a special procedure for installation as opposed to your normal lower control arm.
If someone is good enough to share it then please post it or PM me.
Thanks