All,

I am trying to use parts from several different clusters to make one good cluster for my 300SD. I found a near perfect cluster from a 1991 300SE and even the needles still have their orange color. My goal is to add an outside temp sensor as well as re-beautify the cluster. I want to use the housing from the 1991 300SE because the light tunnels are in very nice condition and the rest of it is very clean. It also has a temp sensor unit. The problem I am having is that I need to change out the plastic strips that run along the bottom for the idiot lights. My car does not have ABS or SRS or ARS, etc and I need to have the glow plug light, etc. I don't know how to replace these strips and the front face of the cluster seems to be molded to the rest. Is this going to be possible or do I have to destroy the cluster just to get at the strip for the idiot lights?

Also, any tips for removing and replacing the needles will be appreciated.

Thanks!

__________________
1991 F250 super-cab 7.3 IDI. (rebuilt by me) Banks Sidewinder turbo, hydroboost brakes, new IP and injectors.
2003 S430 - 107K
1983 300SD - Tanoshii - mostly restored ~400K+.
1983 300SD - Good interior. Engine finally tamed ~250K.
Monark Nozzle Install Video - http://tinyurl.com/ptd2tge