Originally Posted by jay_bob

I did this to my car (OM603.960), prior owner used zip ties and wire to hold hard lines in place.

The clips and pads are not exactly easy to install because they grab so tightly.

But once you do this you will be able to remove the line sets (1-3 and 4-6) as a unit if necessary.

Here are the parts for a 603 (h/t whunter)
Fuel Line Bracket 601-078-20-41-MBZ 2
Fuel Line Bracket 603-078-01-41-MBZ 6
Fuel Line Bracket 601-078-26-41-MBZ 4
Fuel Line Shim 601-078-04-86-MBZ 12

Here is a thread that has pics showing how to mount the clamps. Yes it says glow plugs but the subject came up in the thread.

http://www.peachparts.com/shopforum/diesel-discussion/326478-glow-plugs.html#post3021080
The rubber pieces go between the hard line and the steel brackets. In some of the locations the pad needs to be trimmed to fit.