Quote:
Originally Posted by Diesel911
There is threard on this funola I believe started it.
However, no one has done it.
People say it is possible to remove the Steering Knuckle if you keep the weight of the Car on the Lower Control Arm with a Jack Stand under it.
If you buy and OTC 8149 Pitman Arm Tool/Press you can press out the Ball Joint from the Lower Control Arm; remove the lower Boot retaining Spring and slide the Boot up and re-Grease.
|
ahh yes, I think i remember him starting it, thanks!
That procedure sounds horrible.
Though I wonder if its worth doing before installation, in order to drill out a hole and install a fitting first off, then put the ball joint together, and install in the vehicle