Quote:
Originally Posted by AZreGuy
Thanks for the info, I have 2, one with a broken sensor housing
I removed and still seem to have issues with the EGR removal and vacuum lines, backfires when I rev. So I just wanted to make sure that was not the problem.
I added the Crane kit hoping that would help but no.
|
If I remember correctly, Backfiring after revving the engine is usually a timing problem, but it's been decades since I was involved in that vehicle.
What are you having trouble with on the EGR removel? Do you have a digrm of the vacuum lines? There is an online vsite with the Service manual here:
Model 107
Searching through that will give you a LOT of info.
Scott