603 pump installed!

I hope I did it correctly. I lined the pump up to the gear (didn't have the timing basket in place because I do not feel like pulling my vac pump out of my 603 to get the tool and fight with the gasket) and put the center bolt in to pull it into its splines. Then I put the mounting bolts on and put it on loose. Then I used the turnbuckle to line up the hard lines and bolted the pump on then the hard lines.

I did lock the pump with the tool on the bench before installing.

Hopefully Tomorrow I can find some hose at the hose supply house to connect the oil cooler lines together so I can run it once I get the fuel lines. It's slowly but surely coming together.

I also need to get a new charger for my camera so I can use that instead of my iPhone.