Quote:
Originally Posted by mario65
Thanks.. I thought the low speed setting was triggered by the A/C s32 switch and the hight speed was triggered by a temp sensor on the coolant. I think bypassing it should only set it to low continuous which looks like its fine for what I need. If Im wrong about the speed I need to know. It doesnt seem like high
|
yes you are correct, what I wrote was that you can either use the relay to supply ground to the slow speed relay like the s32 switch does or you can use the relay to direct splice into fan wiring for high speed.
Real easy would be to use the relay to bridge both the brown wires of the s32 switch.