Quote:
Originally Posted by Gusfazekas
can the sensor be accessed by removing ONLY the lower oil pan?
|
Yes, it can.
Quote:
Originally Posted by Gusfazekas
Does anyone know how the sensor is attached inside the lower blocK?
|
There are two screws that mount the sensor, the circlip holds the connector from outside the pan, and there are a couple of plastic clips that secure the wire connecting the two.
__________________
90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start
90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff
|