I added a walbro push pump and mounted it very similarly to what they show on the **************.com website. Pretty simple, and it actually doesn't hang down any lower than anything else under the car. Not worried about it unless I accidentally run over a medium sized animal or semi truck tire tread at speed.

At which point, I'll probably have issues anyway. Ah, and I see that the forum blocks out other site's addresses. Anyway, just get some angle iron, bolt the angle iron to the flat bit of the subframe or whatever just behind where the fuel pickup drops out of the tank, and bolt the pump to the angle iron.

Apologies if I offended anyone by citing another forum/website.

Additionally, I would note I use an aftermarket HIH 3/8 fuel line, which I run right up to the outlet on the top of the pump.