The tools I have a aluminum alloy (6061?) which is 6mm thick. The standard 36mm open end wrench is 380mm long.

The spanner is 410mm long and the holes are 12mm in diameter and on a 56mm circle. The center opening is a 40mm circle. There is a 12mm dog leg (offset) on the spanner handle. The wrenches are close together on the hub so the offset provides some room when holding them.

Actually you might get away with only the 36mm wrench. If the serpentine belt is tight enough to keep the pulley from slipping.

Here is a image of the spanner.

Attached Thumbnails

 

__________________
Good luck.






1998 E320 Wagon