Quote:
Originally Posted by Aquaticedge
Well if its the core then it's next years project. Iirc p.o said it was a slow leak, and took months to leak. So ill pressurize it and go from there I guess.
|
A couple of guys at BW used one of the refrigerants that has stop leak in it, for one of them it's been a few years and he's had to add a can since then, but no detrimental effects.
Add a can with the dye in it, that may point you to the leak.
The condenser is a fairly common site, pinholes that you can't find even with dye, the high-side hose is another at the compression joint, the evap core is the worst though.
Me, I'd probably try the stop leak and a can of dye.
Good luck.