Recoding Sequence:
To recode a radio, follow this procedure:
1.Turn ignition key to lock position one.
2. Turn on the radio. The word CODE appears on the display.
3. Enter the first digit of the radio's antitheft code as it appears on the code card.
The word CODE will disappear and the first number that you have entered will be displayed.
4. Enter the rest of the antitheft code. Each number will be displayed when it is keyed in.
5.When all four antitheft code numbers have been correctly entered, radio operation will resume.
The station stored at push-button 1 FM will play.

Incorrect Code:
If an incorrect antitheft code digit is entered,continue to enter numbers until four are displayed.
The word CODE will appear again. The system allows two more recoding attempts.
After the third incorrect attempt, the word WAIT is displayed.
A period of 15 minutes must pass and the word CODE must again be displayed before recoding can be successful.
The radio must be left on during this period.
This measure is meant to prevent a thief from recoding the radio by randomly entering numbers.
If the correct antitheft code has not been entered after three separate attempts-
and therefore after two 15minute wait intervals - the radio will lock for 24 hours to prevent any further recoding attempts.
The radio must be left on during this period in order for it to re-enter the code mode

__________________
'84 300SD sold
124.128