Thanks everyone for their suggestions, i will drain the gas tank ASAP, I am not really able to get the codes easily from the ECU

Apparently in Canada Radio Shack has been acquired by The Source I went in there the other day and they notified me that they no longer carry the parts needed to build the code reader

I may just have to buy a prebuilt one off ebay, but it takes forever to ship stuff to eastern canada.

I took apart the throttle actuator today to check the wiring, again in the test area the wiring appears good, cleaned it really good while it was out and made sure all the vacuum lines around it were hooked up.

One question on the renosance flap, is the plastic opening (has a small screen in it) next to the electrical plug supposed to have a vacuum line running to it, I searched all around and there wasn't any loose lines.


it's the one they have circled in yellow not the plug but the other thing

I will let you know how I make out once I am sure all the old gas is out.