First of all thanks to all who have put in their thoughts, it is much appreciated.
ok,
I have re removed the valve body and have started the physical inspection.
one thing I promptly found was the tcc/pwm solenoid was not actuating when voltage is applied.
all others were clicking solidly.
my question is can this part cause the error codes given?
055, 151, p0730.
the documentation I have points to y3/6y2 the shift pressure regulating solenoid.
the valve for y3/6y2 seems to be free and working properly.
I also tried to measure resistance on the solenoids with my digital multimeter and could not get any solid readings.
is the trans fluid on/in them interfering with this test?
should I clean them somehow?
if so what way is best?
any thoughts for all of this?

thanks.
gemsbeme