Speed sensor will shut it off and keep it off until you cycle the key. It wont cycle it on and off. Too high pressure in the high side is the only thing I've seen cause a rapid on off cycling. Sometimes you can find a restriction in the high side by feeling for a cold spot in the lines and or looking for frost. A partial blockage can act like an expansion valve allowing the downstream side to get cold when it should be hot.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff