|
Well you already did the ignition switch, it sounds more and more like that's the problem.
Don't bother buying the antenna ring, that's just wasteful, if it was that you would get the "start error" message so it's not it.
Another idea would be (and i have seen various weird problems caused by this, I remember one on a 140 chassis too), where it could be something as simple as a loose screw on the bottom of the fusebox. Wires are joining up on those strips and through use and heat and what have you, they can loosen a bit and cause all sorts of weird things.
To do this, you would pull the fuse panel out of the fuse box to access the bottom of where the fuses are, you will see lots of screws holding wires to the metal strips. I'd disconnect the battery before messing in there though.
|