Since I am thinking today is going to be cut short by the weather, I am just going to modify the radiator, take a bunch of pictures, do some measurements, and pop the radiator back in.

Demo and removal went smooth. Very straight foward. Now, I got the holese drilled out on the radiator and time to weld in the bungs, clean up, and re-install. The large (blue) is for the 3/4" heater hose return from the Heat Exchanger. The one next to it is for the EWP sensor. The one on the other side is a drain cock. Time to weld now. I will update within an hour. I set aside 2 hours today since I have a bunch of parts to mail to forum members; however, if the thunderstorms kick in, might be homebound ... lol

Attached Thumbnails