|
I don't have the exact pin-out for you, but it is 3 wires (this should be the fiber optics changer in a 99). The 3 wires are a power and ground, which are both provided by the radio itself, and a wakeup line, this is also from the radio. I'm sure you must have plugged in the 3 wire connector. The magazine should still eject even if the fiber optics wire is not connected.
If this is the very newest style changer, with the small plastic doors on the side where the suspension is changed from vertical to horizontal, we have had lots of problems with these being caused by the suspension being set incorrectly. They usually arrive in the horizontal mode, make sure on your e class that it is set to vertical mount. Still, I have never seen one not eject the magazine because of this, but I have seen them refuse to recognize the magazine simply because the suspension was set incorrectly.
Gilly
|