Quote:
Originally Posted by cooljjay
Check the threads on the oil cooler fitting...you may have damaged a few removing the old line, very common on the w123....if that is the case it won't seal, you will need to install a new fitting....though some people have used jb weld on the fitting and then screwed and tighten the line...
|
The old fitting came off easily. I was thankful because they can be a pita. The original leak on the old lines was from the crimp.
__________________
85SD 240K & stopped counting painted, putting bac together. 84SD 180,000. sold to a neighbor and member here but I forget his handle. The 84 is much improved from when I had it. 85TD beginning to repair to DD status. Lots of stuff to do.
|