Thread: 1965 190Dc Possible head gasket failure. Diagnosis help.
View Single Post
  #37  
Old 10-10-2013, 04:34 PM
whunter's Avatar
whunter whunter is offline
Moderator
  
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,434
Replacment cylinder head required
Quote:
Originally Posted by DrCherry View Post
Okay here is my catalog of cracks in the head. Continue cleaning or go in another direction?

There are two cracks between the end of a pre-chamber and the valve seat. All four seem to have cracks on the opposite side of the valves.
The cylinder head is junk at this point.
Strip the parts for later need, including pre-chambers, plugs, and all studs.
You should be able to find a good used unit to replace it.

.
__________________
ASE Master Mechanic

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D

https://www.boldegoist.com/
Reply With Quote