Thread: Dang you URO!
View Single Post
  #15  
Old 10-13-2013, 12:57 AM
Diesel911's Avatar
Diesel911 Diesel911 is online now
Registered User
 
Join Date: Sep 2007
Location: Long Beach,CA
Posts: 58,910
Quote:
Originally Posted by gerryvz View Post
Any nü tales of Üro woes from anyone?
Bad news.
My Üro Motor Mounts have more than 4 years on them (I was surprised when I found the paper work that the Motor Mounts were Üro.).
My Üro LCA Bushings and Upper Control Arms (one Boot has a tear) are still working.
Only about 1 year old the Plastic Rear Sway Bar Links are Üro.
(I bought a compete front end kit and it hat all Üro parts; I did not use all of the Parts in the Kit.)
I did not need to replace the Tie Rods or Lower Ball joints so I left those alone. Later I found out the Üro Ball joints would likely be more difficult to press in due to the OD being different then Lemfoerders.

Both Radiator Hoses are Üro. I have to concede that on one I had to use STP on the Nipple to get it over the Nipple.

I admit the Car drives a low amount of miles mostly around town. A long trip is 10 miles one way.

I said in one of the other threads I think that 4-5 Years ago the Üro parts might have been made better; but have no facts to back that up.
__________________
84 300D, 82 Volvo 244Gl Diesel
Reply With Quote