The bearing I stuffed in the Crank is Part# 115-980-01-15. a SKF bearing. the other # is 6202-2RSJ. 15 x 35 x 11 MM. It`s nothing MB specific, just a run of the mill bearing used in a lot of applications.
I have been searching on Google and looking in various Bearing supply places, there seems to be no bearing the size, 15 x 34 x 11mm.
Though a few minutes ago I did find this site that shows a 15 x 34 x 11 bearing for $1.50.
15x34 Bearing 15x34x11 Metal Bearing 6202ZZ
I rented the Pilot Bearing puller like Dan shows in an above post from Auto-Zone. Dan I don`t know how you got it in the hole of the bearing, but it is too large to fit in there. Even tried my spare FAG bearing in my hand, and a no go.
So back to AZ and see what else they have, with my spare bearing with me.
You guys are probably right, there is no way I could have pounded this bearing in a 34mm hole, but it is in there, and squeezed tight so the center will not turn and the Transmission Snout would not slip in until I Dremeled it out some.
Iam looking for a Bore Gauge so when it is out I can get the official inner measurements.
Charlie