Quote:
Originally Posted by oldsinner111
if it was me first I'd get a new chain order,then I align crank shaft to pointer and see how far off i was..remember on the compression stroke,then align cam,and the dist. should be at number one.
|
OK - crankshaft TDC mark is on the pointer. Cam and chain marks are aligned.
But distributor is 30 degrees off.
How do you fix this?
Distributor won't rotate enough to correct 30 degrees off. If I try, the vacuum advance would be pointing to the driver side fender, and the oil cup hits the adjuster dial beneath the dist., and the condenser would hit the valve cover.
Perplexed!
Tom