Quote:
Originally Posted by greazzer
If I did not directly state it, e.g., pop pressure and a BALANCE set of injectors, yes you cannot have a nominal 1,650 PSI and a nominal 1,975 PSI. So, to make sure what I posted is not taken out of context, you cannot use a 115 BAR injector which is set at 115 BAR and use that in your turbo engine, and vice versa.
However, you can clearly set a 115 BAR injector at 135 BAR and it will work.
|
Right.
I was not under the impression that the OP plans on rebuilding or adjusting the injectors, so I gave him a very simple answer.
__________________
1991 F250 super-cab 7.3 IDI. (rebuilt by me) Banks Sidewinder turbo, hydroboost brakes, new IP and injectors.
2003 S430 - 107K
1983 300SD - Tanoshii - mostly restored ~400K+.
1983 300SD - Good interior. Engine finally tamed ~250K.
Monark Nozzle Install Video - http://tinyurl.com/ptd2tge
|